Another batch of these just done, even tested a dyno supplied 'lab grade' equivalent.
The most interesting though is the batch to batch variations! (LZA09-E1) for the new players out there this is identified on the box sticker and wrapping label, this is stamped into one of the flats on the hex nut at the base of the sensor too! Even if I was not offering these I would still be suggesting people strongly to NOT trust an out of the box sensor with generic calibration, cause even if the batch number is the same you still see a variance though not as large....... its cheap at end of the day using a sensor that has been certified to be accurate and precise.
NTK L2H2 New Linearisation
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
Re: NTK L2H2 New Linearisation
Why don't we use Non-dispersive Infrared gas analysers to calibrate the sensor installed?
These devices are sensitive to almost 0.001 from 0,5 lambda to 2 lambda
I've ordered LZA09-E1 directly from NTK Turkiye. Its been a month though but I'll try it.
sounds stupid?
These devices are sensitive to almost 0.001 from 0,5 lambda to 2 lambda
I've ordered LZA09-E1 directly from NTK Turkiye. Its been a month though but I'll try it.
sounds stupid?
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
![Shocked :shock:](./images/smilies/icon_eek.gif)
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
Last edited by RICE RACING on Fri Jun 23, 2023 9:37 pm, edited 2 times in total.
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
Something cometh .........................................................
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 1344
- Joined: Sun Dec 07, 2008 2:04 pm
Re: NTK L2H2 New Linearisation
only 4 ?
Hopefully for the hot side ?
Hopefully for the hot side ?
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
Does 8
![Cool 8-)](./images/smilies/icon_cool.gif)
and *yes* any side
![Cool 8-)](./images/smilies/icon_cool.gif)
![Cool 8-)](./images/smilies/icon_cool.gif)
![Cool 8-)](./images/smilies/icon_cool.gif)
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
something that may get people aroused is the fact of turbine exit pressure and just how large an effect this can and does have, say on a ~2000bhp methanol drag racing application (I've been running them on everything since 2008 or so, but a more extreme rich running example will get the juices flowing!). Will have a car running TEP sensor and happy to put up some info here to share since its often overlooked, well not openly discussed at minimum.
thus the idea to run a device that is not just pre set rather allows the end user to custom calibrate their own curves, for most commonly TEP but then also if need be run on TIP per cylinder applications too![Cool 8-)](./images/smilies/icon_cool.gif)
thus the idea to run a device that is not just pre set rather allows the end user to custom calibrate their own curves, for most commonly TEP but then also if need be run on TIP per cylinder applications too
![Cool 8-)](./images/smilies/icon_cool.gif)
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 448
- Joined: Mon Feb 24, 2014 1:08 am
Re: NTK L2H2 New Linearisation
Here is an example of O2 readings done poorly, pick a number any number
https://youtu.be/qzLY0iA4050
https://youtu.be/qzLY0iA4050
- ECM Lambda PRO 'claimed' professional unit reference 12.5:1 AFR
- ECM Lambda PRO output to dyno 12.1:1 AFR
- unknown brand 8 cylinders listed AFR average of 13.0:1
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
-
- Posts: 18
- Joined: Thu Jan 10, 2019 8:14 pm
Re: NTK L2H2 New Linearisation
Can anyone confirm if the LZA08-H6 can be used acceptably? I've been digging for 24 hours trying to sort this out. The LZA08-H6 is available at retail stores in my area so I can be mostly sure I'm receiving an authentic part and have it quickly.