S6 running with SR20DET

[Jez]

Just got to sort out the cold start, figure out why I'm not getting a speed reading from my ABS sensors and get some pins from somewhere so I can get my boost control solenoid wired up.

[Ryan.g]

Good stuff Jez

Is this in your TA car?

[Jez]

Yup - should be good
Got the cold start and closed loop lambda control sorted this evening

[Ryan.g]

How did mapping go Jez?

[Jez]

Not too bad. Some how managed 530bhp at 1.4 bar (got 470bhp on the old ECU, reckon its down to the rings being bedded in after the last track day - the engine has only done around 350 miles) and 549 at 1.6bar. I'm quite det limited, which I think it due to the CR being higher than I'd have liked. But still, 550bhp in a 1100kg car is good fun

[Wez]

Not too bad. Some how managed 530bhp at 1.4 bar (got 470bhp on the old ECU, reckon its down to the rings being bedded in after the last track day - the engine has only done around 350 miles) and 549 at 1.6bar. I'm quite det limited, which I think it due to the CR being higher than I'd have liked. But still, 550bhp in a 1100kg car is good fun

You had chance to try it in anger or you waiting for abingdon?

[Jez]

Not tried it properly on the road or track yet. I have been for a quick blast though and its chuffing quick.