Latest Base Maps

Technical Help / Firmwares for the Yaris GR Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

Latest Base Maps

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_YarisGR 1.21.SC
(46.26 KiB) Downloaded 2014 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_YarisGR 1.23.SC
(51.46 KiB) Downloaded 1926 times
AwdBase_YarisGR 1.23 X4.SC
(51.46 KiB) Downloaded 1962 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_YarisGR 1.24.SC
(55.83 KiB) Downloaded 1933 times
AwdBase_YarisGR 1.24 X4.SC
(55.78 KiB) Downloaded 1906 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_YarisGR 1.25 X4.SC
(61.05 KiB) Downloaded 2121 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_YarisGR 1.27.SC
(66.84 KiB) Downloaded 240 times
AwdBase_YarisGR 1.27 X4.SC
(66.87 KiB) Downloaded 241 times
Post Reply