The latest Infiniti AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_QX60 1.15.SC
- (38.8 KiB) Downloaded 2384 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_QX60 1.18.SC
- (42.89 KiB) Downloaded 2341 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_QX60 1.21.SC
- (46.26 KiB) Downloaded 2348 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_QX60 1.23 X4.SC
- (51.46 KiB) Downloaded 2288 times
-
- AwdBase_QX60 1.23.SC
- (51.46 KiB) Downloaded 2279 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_QX60 1.24 X4.SC
- (55.78 KiB) Downloaded 2283 times
-
- AwdBase_QX60 1.24.SC
- (55.83 KiB) Downloaded 2220 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_QX60 1.25 X4.SC
- (61.05 KiB) Downloaded 2211 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_QX60 1.27 X4.SC
- (66.87 KiB) Downloaded 434 times
-
- AwdBase_QX60 1.27.SC
- (66.84 KiB) Downloaded 435 times
Re: Latest Base Map
For use with 1.28 Firmware
- Attachments
-
- AwdBase_QX60 1.28 X4.SC
- (72.44 KiB) Downloaded 19 times
Re: Latest Base Map
1.29 base map
- Attachments
-
- AwdBase_QX60 1.29 X4.SC
- (72.89 KiB) Downloaded 15 times