Wiring info

Post Reply
Evo8mr
Posts: 4
Joined: Sun Apr 12, 2015 9:28 pm

Wiring info

Post by Evo8mr »

When wiring a toggle style switch for launch activation do I go 12v from the switch to the input or 5v or do I go from input to switch to earth?
Many thanks
stevieturbo
Posts: 1321
Joined: Sun Dec 07, 2008 2:04 pm

Re: Wiring info

Post by stevieturbo »

Generally switch to ground, and set the input to thermistor. Although I guess you could switch it to 5v too ?

Although generally I have launch active all the time via CAL position.

It's never actually active until you're stopped and pedal etc is over the thresholds. So even with it on all the time, normal driving it would never actually operate.

So isn't a huge need to turn it off via a switch
Evo8mr
Posts: 4
Joined: Sun Apr 12, 2015 9:28 pm

Re: Wiring info

Post by Evo8mr »

Great
Thank you
Post Reply