The latest Porsche 991 AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_991 1.14.SC
- (37.21 KiB) Downloaded 5063 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_991 1.18.SC
- (42.89 KiB) Downloaded 5072 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_991 1.21.SC
- (46.26 KiB) Downloaded 4990 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_991 1.23 X4.SC
- (51.46 KiB) Downloaded 4653 times
-
- AwdBase_991 1.23.SC
- (51.46 KiB) Downloaded 4594 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_991 1.24 X4.SC
- (55.78 KiB) Downloaded 4879 times
-
- AwdBase_991 1.24.SC
- (55.83 KiB) Downloaded 4961 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_991 1.25 X4.SC
- (61.05 KiB) Downloaded 4933 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_991 1.27 X4.SC
- (66.87 KiB) Downloaded 2958 times
-
- AwdBase_991 1.27.SC
- (66.84 KiB) Downloaded 2673 times
Re: Latest Base Map
For use with 1.28 Firmwares
- Attachments
-
- AwdBase_991 1.28 X4.SC
- (72.44 KiB) Downloaded 2239 times
Re: Latest Base Map
1.29 Base map
- Attachments
-
- AwdBase_991 1.29 X4.SC
- (72.89 KiB) Downloaded 2624 times