The latest Huracan/R8 AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_HuracanR8 1.14.SC
- (37.21 KiB) Downloaded 882 times
Re: Latest Base Map
1.15 Firmware Base Map
- Attachments
-
- AwdBase_HuracanR8 1.15.SC
- (41.62 KiB) Downloaded 783 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_HuracanR8 1.18.SC
- (42.89 KiB) Downloaded 767 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_HuracanR8 1.21.SC
- (48.05 KiB) Downloaded 759 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_HuracanR8 1.23 X4.SC
- (51.46 KiB) Downloaded 666 times
-
- AwdBase_HuracanR8 1.23.SC
- (51.46 KiB) Downloaded 723 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_HuracanR8 1.24 X4.SC
- (55.78 KiB) Downloaded 686 times
-
- AwdBase_HuracanR8 1.24.SC
- (55.83 KiB) Downloaded 671 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_HuracanR8 1.25 X4.SC
- (61.05 KiB) Downloaded 665 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_HuracanR8 1.27 X4.SC
- (66.87 KiB) Downloaded 236 times
-
- AwdBase_HuracanR8 1.27.SC
- (66.84 KiB) Downloaded 249 times
Re: Latest Base Map
For use with 1.28 Firmwares
- Attachments
-
- AwdBase_HuracanR8 1.28 X4.SC
- (72.44 KiB) Downloaded 16 times
Re: Latest Base Map
1.29 base map
- Attachments
-
- AwdBase_HuracanR8 1.29 X4.SC
- (72.89 KiB) Downloaded 11 times