Tiny dash battery warning low during ignition on and start-up

[dennis.elands]

Hello,

I have an issue with my Tiny dash, the battery voltage low warning keeps popping up during ignition on (and also sometimes during start-up).
During the ignition on part the battery voltage level is even above the minimum voltage value I set in the Tiny dash.
Only if I set the voltage low alarm back to default it doesn't trigger the alarm.

The battery low level is set to: 11V and I use firmware version 1.17 but the older version had the same issue.

Is this a software bug of did I misconfigure my unit?
Also is it possible to add a delay time (like the oil pressure warning) so during start-up if the voltage dips below the threshold it won't trigger an alarm?

Best regards!
Dennis
P.s. best wishes for 2024!

[stevieturbo]

Can you add a delay to the alarm ?

Voltage will certainly drop during cranking

[dennis.elands]

Hello Steve,
That delay feature is currently missing for the battery voltage alarm, so I hope Syvecs can add it?
BR Dennis

[beetos]

I have a TinyD on my N54 plug and play and it does the same thing with voltage warning. Interestingly, I also have a TIny on my Syvecs equipped GR Yaris, and that does not do it. Both have the same firmware.

[dennis.elands]

Hello Beetos,

Thank you for mentioning that you are having the same issue.
I made a post for a software change to get this sorted.

viewtopic.php?t=1474

Best regards
Dennis Elands

[Ryan.g]

See latest firmware, we have gates on runmode

[dennis.elands]

Thank you!
I can confirm that with the firmware update 1.18 it's solved.