Latest Base Map

Technical Help / Firmwares for the Porsche 997.1 / 9972 Awd Controllers
Locked
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

Latest Base Map

Post by Ryan.g »

The latest Porsche 997 AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Attachments
AwdBase_997 1.15.SC
(38.8 KiB) Downloaded 3609 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

1.18

Post by Ryan.g »

1.18 Base map, must be used with 1.18 Firmware
Attachments
AwdBase_997 1.18.SC
(42.89 KiB) Downloaded 3818 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

1.21 Base Map

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_997 1.21.SC
(46.26 KiB) Downloaded 3500 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_997 1.23.SC
(51.46 KiB) Downloaded 3633 times
AwdBase_997 1.23 X4.SC
(51.46 KiB) Downloaded 3479 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_997 1.24.SC
(55.83 KiB) Downloaded 3499 times
AwdBase_997 1.24 X4.SC
(55.78 KiB) Downloaded 3500 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_997 1.25 X4.SC
(61.05 KiB) Downloaded 3540 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_997 1.27.SC
(66.84 KiB) Downloaded 1630 times
AwdBase_997 1.27 X4.SC
(66.87 KiB) Downloaded 1595 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.28 Firmwares
Attachments
AwdBase_997 1.28 X4.SC
(72.44 KiB) Downloaded 1293 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 580
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

1.29 Base map
Attachments
AwdBase_997 1.29 X4.SC
(72.89 KiB) Downloaded 1087 times
Locked