Latest Firmware Releases

Technical Help / Firmwares for the Audi R8 Gen2 and Lamborghini Huracan Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 344
Joined: Fri May 30, 2008 3:05 pm

Latest Firmware Releases

Post by Ryan.g »

This thread is for tracking the firmware builds of the AWD Huracan / R8 units. When a new release is available it will be added to the end of this thread.

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

Any further Questions please E-mail support@syvecs.co.uk or speak to your nearest dealer
Last edited by Ryan.g on Tue May 04, 2021 1:33 pm, edited 1 time in total.
Ryan.g
Syvecs Staff - Caretaker
Posts: 344
Joined: Fri May 30, 2008 3:05 pm

1.14.2

Post by Ryan.g »

This is the first public release level

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

Firmware Version 1.14.2 - www.syvecs.com/downloads/AWD_Huracan.enc
Last edited by Ryan.g on Tue May 04, 2021 1:33 pm, edited 1 time in total.
Ryan.g
Syvecs Staff - Caretaker
Posts: 344
Joined: Fri May 30, 2008 3:05 pm

1.15

Post by Ryan.g »

Version 1.15 contains the following updates

*Change Light Output Pin (HBR4)
*Drive ratio calculation for Gear detection on Manual Trans cars
*Enable Gear Detection from Drive Ratio option
*Change Light Min Speed
*Change Light RPM
*Change Light Min Tps


Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

Firmware Version 1.15.2 - www.syvecs.com/downloads/AWD_HuracanR8.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 344
Joined: Fri May 30, 2008 3:05 pm

15.3

Post by Ryan.g »

Version 1.15.3 contains a background change to send out the paddle up can frame for autoshift with R8

www.syvecs.com/downloads/AWD_HuracanR8_153.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 344
Joined: Fri May 30, 2008 3:05 pm

1.18 Firmware

Post by Ryan.g »

Version 1.18 contains the following updates

Changes since 1.15

1.16 - Added CanLogging option - New software will be released soon which allows you to monitor and log the canbus via USB
1.17 - CarCode Map Added for 997 Platform
1.18 - Added simple Map locking and Restriction option. - Press C, F inside a map


Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

Firmware Version 1.18 - www.syvecs.com/downloads/AWD_HuracanR8_1-18-1.enc
Post Reply