https://www.youtube.com/watch?v=18KD-91yYD4
Doesn't mention it specifically
Search found 1343 matches
- Wed May 01, 2024 8:26 pm
- Forum: S6 GP/PnP Technical
- Topic: 2003 Ford Focus RS - sensors question ?
- Replies: 280
- Views: 2171283
- Wed May 01, 2024 8:24 pm
- Forum: S6 GP/PnP Technical
- Topic: 2003 Ford Focus RS - sensors question ?
- Replies: 280
- Views: 2171283
Re: 2003 Ford Focus RS - sensors question ?
That happens sometimes when changing firmwares.
Damned if I can remember specific route to clearing it, but need to do as it says really by clearing the logbook. I think Device/Logbook ?
Or maybe clear the datalogs in SData ?
Damned if I can remember specific route to clearing it, but need to do as it says really by clearing the logbook. I think Device/Logbook ?
Or maybe clear the datalogs in SData ?
- Tue Apr 30, 2024 8:11 am
- Forum: S7-I / S7Plus Technical
- Topic: Can1 generic rx with a pnp s7plus
- Replies: 6
- Views: 77
Re: Can1 generic rx with a pnp s7plus
If you could adapt can yourself, you could maybe go generic, and pickup can wheel speeds etc from the abs and send them over in the Bosch Motorsport format.
Not sure what other can integration there is with such a kit though. Probably is more ?
Not sure what other can integration there is with such a kit though. Probably is more ?
- Mon Apr 29, 2024 8:32 pm
- Forum: S7-I / S7Plus Technical
- Topic: Can1 generic rx with a pnp s7plus
- Replies: 6
- Views: 77
Re: Can1 generic rx with a pnp s7plus
Which pnp kit is it ?
Is the S7 essential ?
Move to an S8 ?
Must admit, CAN limitations on the S7 are why I like to stick with the S8 where possible.
Is the S7 essential ?
Move to an S8 ?
Must admit, CAN limitations on the S7 are why I like to stick with the S8 where possible.
- Sat Apr 27, 2024 9:22 am
- Forum: S7-I / S7Plus Technical
- Topic: Can1 generic rx with a pnp s7plus
- Replies: 6
- Views: 77
Re: Can1 generic rx with a pnp s7plus
Have you asked on either the Turbo Lamik facebook group, or the Syvecs facebook group page ?
Or perhaps contact Whifbitz, they've done quite a few 8HP's
Or perhaps contact Whifbitz, they've done quite a few 8HP's
- Mon Apr 22, 2024 7:23 am
- Forum: S6 GP/PnP Technical
- Topic: 2003 Ford Focus RS - sensors question ?
- Replies: 280
- Views: 2171283
Re: 2003 Ford Focus RS - sensors question ?
Just set your undriven to whatever wheel, and driven speed to whatever relevant wheels
- Mon Apr 15, 2024 9:44 am
- Forum: VAG Technical
- Topic: Port Injection 2.0TFSI
- Replies: 10
- Views: 39190
Re: Port Injection 2.0TFSI
Nice update.
Can the orifice in the high pressure pump be enlarged so the sensor gets a better reading ?
Can the orifice in the high pressure pump be enlarged so the sensor gets a better reading ?
- Sun Apr 14, 2024 9:27 pm
- Forum: General Syvecs Chat
- Topic: Engine Management Systems Tuning Courses
- Replies: 7
- Views: 19416
Re: Engine Management Systems Tuning Courses
Just FYI, "Jack", is a spambot. Another one...yet another one.
I've reported it a few times, but it's still there.
I've reported it a few times, but it's still there.
- Wed Apr 10, 2024 8:16 pm
- Forum: General Syvecs Chat
- Topic: Engine Cut for cartek XR
- Replies: 22
- Views: 701
Re: Engine Cut for cartek XR
testing mine ( must admit, haven't before )... engine not running, not starting it for the sake of a test just now. Key on, ecu live etc.....hit kill switch. Goes from 5v to 0.005v, around 0.175s later Enable switch goes off, then 10ms later Engine enable goes to OFF And roughly yes 0.5s after I hit...
- Tue Apr 09, 2024 5:51 pm
- Forum: General Syvecs Chat
- Topic: Engine Cut for cartek XR
- Replies: 22
- Views: 701
Re: Engine Cut for cartek XR
Must be some oddity with the S7 compared to the S8. Your configuration is identical to what I have 2 x S8's running with with the Cartek. I guess you could maybe play with a resistor inline ( not sure on value ) to try and drop the voltage input to closer to 5v ? Maybe the input is confused with rec...