Syvecs Forums

hi all, ive changed the cranck and cam trigger on my evo 7 to an -18 and single point on the cam. ive got full 720 sync and checke'd the timing ofset with a timing light. now all is functioning and well but the car stals when stopping at a trafic light and has NOOOOO power. the last time the car was...

This should give you something on FAN08. I've left flagged the items changed. It's a 3d map/table, for no other reason than it just is on that channel. I used speed, but it is irrelevant here. I've used TPS1, so the blade will need to move for the signal to change. But you could just as easily set ...

stevieturbo wrote: ↑Mon Mar 02, 2020 6:09 pm 5v line connected to the PWM output via a 1k resistor. Yes.

And the PWM output will then give you your voltage after you create a suitable table

i stil have dificulty with creating an table.

can you help me with this?

non of the TPS a/b and PPS a/b wil go from 0.5 to 4.5 thats the problem.

not quite sure how to wire it though.

as i understand at this pont:

5v source, inline an 1 Kohm resistor, and connect that to one of the spare injector/PWM outputs ?

hi all, ive put an s7plus in my evo 7 with acd/ayc. now all is up and running but only have one problem. ive converted the car to DBW but the ACD/AYC cumputer needs an tps signal to work. ive got this relpy from the syvecs help team: Best would be to use a 1kohm pull up resistor from the 5v output o...