Syvecs Forums

thanks guys, much appreciated

So if I have the global at 0.6 I'm guessing if I was to adjust the entire fuel table instead I'd reduce it. How much would you recommend Steve?

Afternoon guys
I'm wanting to setup my EGT sensor in Scal. Now I know it uses pins 39 and 62 but what do I assign the sensor to in IO configuration. Will it be KT+:CTL-48

Cheers
John

That's a bit beyond me Steve at the moment. I've tried what Tim suggested and it's worked perfectly. I reduced the global to 0.6 and the car runs nicely at 14.8-15-0 AFR.

Morning all I've got a supra here with an S6 running BPU with 440cc injectors, now I've changed the injectors for 1000cc and fitted a single turbo. The map needs the fueling adjusted for the bigger injectors so I can get the car running. Is there an injector size option in the menus the I can adjust...

Hi Pat Thanks for the reply. Maybe I've explained this wrong. Ryan set this up on my old supra with a push to make button on the wheel. Im installing the S6 for someone else and wanted it all wired in for the tuner to do his stuff. I believe the owner has spoke to Romain for mapping. Rywn did explai...

Hi guys
I'm wanting to set up a rolling launch on a supra. Now I've fitted a push to make button on the steering wheel with 1 side to ground and I've ran the other side to the S6. What pin can I use for this facility please?

Cheers
John

I've just dropped Ryan a line to see what he did and I'll report back.

When Ryan did my old supra Hexonly connected 2 wheels but I'm not sure which one. Id have thought it would be 1 front and 1 rear.

Cheers
John

I'm retrofitting ABS sensors to an NA supra and running them to the Syvecs. I only have 2 sensor inputs on the loom though, FL speed input and FR speed input. What do I do with the rear sensor inputs?

Cheers
John