The latest Infiniti AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_QX60 1.15.SC
- (38.8 KiB) Downloaded 2259 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_QX60 1.18.SC
- (42.89 KiB) Downloaded 2218 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_QX60 1.21.SC
- (46.26 KiB) Downloaded 2224 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_QX60 1.23 X4.SC
- (51.46 KiB) Downloaded 2175 times
-
- AwdBase_QX60 1.23.SC
- (51.46 KiB) Downloaded 2151 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_QX60 1.24 X4.SC
- (55.78 KiB) Downloaded 2162 times
-
- AwdBase_QX60 1.24.SC
- (55.83 KiB) Downloaded 2115 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_QX60 1.25 X4.SC
- (61.05 KiB) Downloaded 2095 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_QX60 1.27 X4.SC
- (66.87 KiB) Downloaded 328 times
-
- AwdBase_QX60 1.27.SC
- (66.84 KiB) Downloaded 326 times
Re: Latest Base Map
For use with 1.28 Firmware
- Attachments
-
- AwdBase_QX60 1.28 X4.SC
- (72.44 KiB) Downloaded 8 times
Re: Latest Base Map
1.29 base map
- Attachments
-
- AwdBase_QX60 1.29 X4.SC
- (72.89 KiB) Downloaded 9 times