User defined outputs?

Post Reply
Bikey
Posts: 4
Joined: Thu Apr 09, 2015 5:25 am

User defined outputs?

Post by Bikey »

From having a look through the software, there do not appear to be any user defined outputs (ideally 2 or 3 axis). Am I missing something? Is this a possibility?
Thanks.
stevieturbo
Posts: 1321
Joined: Sun Dec 07, 2008 2:04 pm

Re: User defined outputs?

Post by stevieturbo »

There aren't really, but it would be great if there was.

What exactly do you need to control ?
Bikey
Posts: 4
Joined: Thu Apr 09, 2015 5:25 am

Re: User defined outputs?

Post by Bikey »

I would like PWM control of the lift pumps in my saddle tanks. I can work off the main pump output, but I would like to reference each tank's level sensor and a flow sensor (so the relevant pump turns off when a tank is empty). At the moment it looks like I will need to handle part of this through my Race Technology data system (which has programmable PWM outputs)
I think I could come up with some others too, but controlling the pumps was the main one thus far.
Post Reply