Page 1 of 1

Creat own "Sensor"

Posted: Wed Sep 05, 2018 7:09 pm
by GLDN6
Hi Guys
I have to measure on my tfsi the exhaust gas pressure. However, nothing is configured in front of "sensors".
Can I invent a "sensor" myself and enter the name? with characteristic line etc.

Best regards

Re: Creat own "Sensor"

Posted: Thu Sep 06, 2018 3:10 am
by RICE RACING
Yes :)

See below.
example of user defined sensor
example of user defined sensor
Les Beane.jpg (268.49 KiB) Viewed 13098 times

Re: Creat own "Sensor"

Posted: Thu Sep 06, 2018 2:00 pm
by GLDN6
i only see these options the calibrate the sensor ....

Re: Creat own "Sensor"

Posted: Thu Sep 06, 2018 5:12 pm
by RICE RACING
Type
V (view)
C (customizing options)

You will then see the table I posted,under sensors, user definable sensors.

Re: Creat own "Sensor"

Posted: Thu Sep 06, 2018 7:58 pm
by stevieturbo
This covers same sort of thing, albeit for the custom maps

https://www.youtube.com/watch?v=IVIdYESOuOQ

Re: Creat own "Sensor"

Posted: Fri Sep 14, 2018 5:13 pm
by GLDN6
Thank yoou for your help guys, now it working fine=)