Re: Latest S6 Firmware
Posted: Thu Nov 08, 2012 8:10 am
This Link is for version 1.33.1 of the S6 firmware.
PLEASE ENSURE LATEST SSUITE SOFTWARE IS IN USE BEFORE UPGRADING FIRMWARE!!!
CAVEAT : The introduction of tbvA and tbvB may reverse the TBV drive direction. If the vehicle will not idle after upgrade, reverse the slope of the TBV linearisation
This is a features / tweaks release and adds the following :
* Ability to use 12 Position Calibration Switches and Traction control Switches
* Cal Overide Option added - Ideal for rolling antilag or Pit limiter function
* Cal up and Down options added - Perfect for using cruise control switches for a cal switch
* Trac Up and Down Options added - Perfect for using cruise control switches for a Trac switch
* Lateral G Gauards on all engine trips - stops engine from being cut due to oil stravation mid corner
* limp mode trip if vvt fails
* tbv A and B outputs with duty linearisations - For driving 3 pin idle valves open and closed
* option to turn on filter caps for wheel speed inputs
* tps-selected cut/blip strategy
* Limp State causes Sensor warning light to become active
* eop1/eot/ect/ccp/fp trips recoded
Enjoy
PLEASE ENSURE LATEST SSUITE SOFTWARE IS IN USE BEFORE UPGRADING FIRMWARE!!!
CAVEAT : The introduction of tbvA and tbvB may reverse the TBV drive direction. If the vehicle will not idle after upgrade, reverse the slope of the TBV linearisation
This is a features / tweaks release and adds the following :
* Ability to use 12 Position Calibration Switches and Traction control Switches
* Cal Overide Option added - Ideal for rolling antilag or Pit limiter function
* Cal up and Down options added - Perfect for using cruise control switches for a cal switch
* Trac Up and Down Options added - Perfect for using cruise control switches for a Trac switch
* Lateral G Gauards on all engine trips - stops engine from being cut due to oil stravation mid corner
* limp mode trip if vvt fails
* tbv A and B outputs with duty linearisations - For driving 3 pin idle valves open and closed
* option to turn on filter caps for wheel speed inputs
* tps-selected cut/blip strategy
* Limp State causes Sensor warning light to become active
* eop1/eot/ect/ccp/fp trips recoded
Enjoy