Launch Control Settings

Grabla66
Posts: 66
Joined: Tue Oct 25, 2016 7:01 am
Location: Fordshire
Contact:

Re: Launch Control Settings

Post by Grabla66 »

I'll put some screen shots up when I've had time to go through all the settings this week.

Is there a diagram that explains all the settings that contribute to launch rpm and launch exit speeds?

Grabla66
Posts: 66
Joined: Tue Oct 25, 2016 7:01 am
Location: Fordshire
Contact:

Re: Launch Control Settings

Post by Grabla66 »

Panic over.

I've now looked at the data from the last pair of runs on Sunday, and before I went out, I'd raised the upper base engine rpm from 6050 to 6500 at the highest speed breakpoint of 45mph. (It was previously set to 6050rpm which equals 40.5mph in 1st gear so it couldnt have reached 45mph at those revs)

The data from the last two runs shows that the engine rpm was allowed to rise above 6000rpm during launch, the automatic gearshift occurred at 6000rpm, and PIT/LAUNCH events stopped a fraction over 40mph, so it was all working properly.

Q) What key do I need to press to get the data to appear inset in the graphs, like it shows on Ryans's Syvecs training videos? (see attachment)
Attachments
data in lifeview.png
data in lifeview.png (18.07 KiB) Viewed 1961 times
LC working properly.png
LC working properly.png (88.7 KiB) Viewed 1962 times

stevieturbo
Posts: 898
Joined: Sun Dec 07, 2008 2:04 pm

Re: Launch Control Settings

Post by stevieturbo »

Options, All Toggle Options, Show items in graph.

Grabla66
Posts: 66
Joined: Tue Oct 25, 2016 7:01 am
Location: Fordshire
Contact:

Re: Launch Control Settings

Post by Grabla66 »

Thanks I'd never have found that.

Post Reply