User Defined Frequency Sensor

Post Reply
C. Ludwig
Posts: 35
Joined: Mon Sep 23, 2013 10:04 pm

User Defined Frequency Sensor

Post by C. Ludwig »

I have a fuel flow sensor that outputs a variable frequency signal. Is it possible to bring it in as a user defined sensor? The sensor linearization only allows voltage on the X axis. Ideas?
stevieturbo
Posts: 1311
Joined: Sun Dec 07, 2008 2:04 pm

Re: User Defined Frequency Sensor

Post by stevieturbo »

I came across this too with a flow sensor I bought to try and use for a WI setup....50-115Hz it seemed to do.

I couldnt find or think of any way of getting the ecu to use that signal

Really...only frequency type inputs we have so far are likes of cam sensor, wheel speed, crank sensor...Not sure how you could even make use of those inputs to do something.

You can buy frequency to analogue convertors, but they seem to have considerable quoted lag times, 1-2s which is a bit crap.

In the end I just used a pressure sensor instead, and it's worked out ok.
TimH
JT Innovations
Posts: 718
Joined: Wed Sep 01, 2010 3:51 pm

Re: User Defined Frequency Sensor

Post by TimH »

Flex fuel is a frequency sensor, sending 50-150Hz for 0-100% alcohol.

Whether you can create a custom sensor based on on that as a starting point I don't know - otherwise at least as a fuel comp sensor you will get a percent reading that you could log, perhaps?
stevieturbo
Posts: 1311
Joined: Sun Dec 07, 2008 2:04 pm

Re: User Defined Frequency Sensor

Post by stevieturbo »

I had thought about the flex fuel myself, but it didnt actually seem clear what the input was and I know there are some sensors that are analogue.

Given the inputs are clearly capable of receiving such a signal, it would make sense to have some software options to make use of one.
C. Ludwig
Posts: 35
Joined: Mon Sep 23, 2013 10:04 pm

Re: User Defined Frequency Sensor

Post by C. Ludwig »

And if you're already using the flex fuel input...
TimH
JT Innovations
Posts: 718
Joined: Wed Sep 01, 2010 3:51 pm

Re: User Defined Frequency Sensor

Post by TimH »

C. Ludwig wrote:And if you're already using the flex fuel input...
...then I think you're stuffed :(
stevieturbo
Posts: 1311
Joined: Sun Dec 07, 2008 2:04 pm

Re: User Defined Frequency Sensor

Post by stevieturbo »

TimH wrote:
C. Ludwig wrote:And if you're already using the flex fuel input...
...then I think you're stuffed :(
We're stuffed with this one at present anyway lol
nmerdan
Posts: 30
Joined: Mon Jan 27, 2020 7:40 am

Re: User Defined Frequency Sensor

Post by nmerdan »

There any chance this gets implemented in the near future?
Post Reply