Syvecs iPhone / iPad App - Classic

For support and updates on the Syvecs Bluetooth module

Moderator: Wez

Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Syvecs iPhone / iPad App - Classic

Post by Wez »

Hello All,

You may have seen there is a Syvecs app now available on the Apple App store.

The initial release uses either the stack stream or a fixed custom can stream via rs232 output, this is via the Syvecs Apple approved bluetooth module. The fixed can profile is based on the most commonly used setup from Syvecs.
iPad-Ret-Landscape.png
iPad-Ret-Landscape.png (65.13 KiB) Viewed 32051 times
I am currently working on a new release that has the following features :-

* User Assignable Display Output
* User Configurable CAN profile
* High / Low Peak Values
* Unit Selection
* Calibration Switching via PWM output
* Traction Control Switching via PWM output
* User Configurable Switch Output via 0-5v output

8-)
Last edited by Wez on Thu Nov 07, 2013 9:57 am, edited 1 time in total.
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Re: Syvecs iPhone / iPad App

Post by Wez »

Little update 8-)

The output function is now working from within the App, there are two available that can be used for calibration and traction control switching with ten positions for each, just need to finish up the interface, this uses two inputs on the ECU.

http://www.youtube.com/watch?v=wSCwIxMrmcA
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
secure
Posts: 254
Joined: Tue Apr 21, 2009 7:38 am

Re: Syvecs iPhone / iPad App

Post by secure »

Good job! Now I can switch to ipad from carpc.
I doubt I have spare input. Which inputs it uses and why two?
Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Re: Syvecs iPhone / iPad App

Post by Wez »

secure wrote:Good job! Now I can switch to ipad from carpc.
I doubt I have spare input. Which inputs it uses and why two?
This version allows you to replace the two inputs into the ECU that you are currently using for calibration and traction control switches.
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
Steve
Posts: 43
Joined: Sun May 19, 2013 7:38 pm

Re: Syvecs iPhone / iPad App Chat

Post by Steve »

Any update to our phone call Wez?

:D
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs - Mapped by Ryan
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.
- SOLD 2017
Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Re: Syvecs iPhone / iPad App Chat

Post by Wez »

Steve wrote:Any update to our phone call Wez?

:D
We are looking to implement cal and trc switching via rs232, im not sure on timescales, Ryan may have a better idea as it would require a firmware update for the ECU.

Regarding the ability to remember the last position a firmware update could be applied to the BT module where it was using the cal and trc outputs wired from the module.
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
secure
Posts: 254
Joined: Tue Apr 21, 2009 7:38 am

Re: Syvecs iPhone / iPad App Chat

Post by secure »

I can't rotate the screen on IPAD mini? No landscape mode on ipad mini?
Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Re: Syvecs iPhone / iPad App Chat

Post by Wez »

Works OK here on my mini, which screen are you trying to rotate and which version you running?

EDIT: which iOS version also?
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
secure
Posts: 254
Joined: Tue Apr 21, 2009 7:38 am

Re: Syvecs iPhone / iPad App Chat

Post by secure »

It was the latest Syvecs version. I just updated to latest ios version and it works now!

Regarding for the interface. can we use custom shiny gauges in the future like that? :D

Image

Image
Wez
Santa's Little Helper
Posts: 267
Joined: Thu May 22, 2008 3:19 pm
Location: London

Re: Syvecs iPhone / iPad App Chat

Post by Wez »

I am currently working on a new cross platform release with more features ;)
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs
Post Reply