oil pressure sender

For Subaru Technical Chat
Post Reply
TFS
Posts: 2
Joined: Fri Mar 26, 2010 7:53 am

oil pressure sender

Post by TFS »

Hi

Question for Pat

After getting the ECU and DASH (race-tec dash2) working together Ryan mentioned that we could input the oil pressure gauge to the ECU i was hoping that you could tell me what pin's to use it is a 93-96 plug and play.

Also was wondering if you had the wiring for the new age pencil coils as this seems to be the way to go. SORTED coils

many thanks to you and Ryan for the help over the last few weeks.

Cheers Stewart and Bod from TFS Racing.
TFS
Posts: 2
Joined: Fri Mar 26, 2010 7:53 am

Re: oil pressure sender

Post by TFS »

Bump
pat
Syvecs Staff - Cleaner
Posts: 356
Joined: Fri May 23, 2008 10:23 am
Location: Out there... somewhere
Contact:

Re: oil pressure sender

Post by pat »

Stewart,

Any spare AB, AU or AV input will do. Each PnP ECU calibration should have in the Calibration Comments an I/O list, that is to say what each S6 input and output is connected to on the OEM wiring. Just choose one which isn't already used by something else and splice the new signal into the OEM loom (if memory serves, two of the AB inputs are connected to the Select Monitor signal wires, for example).

Hope this helps,

Pat.
Post Reply