random features.

Any feature requests for the Syvecs Engine Control Systems
stevieturbo
Posts: 838
Joined: Sun Dec 07, 2008 2:04 pm

random features.

Post by stevieturbo » Thu Aug 14, 2014 12:24 am

In no particular order

1. Ghost trace over cells passed through ( one that remains until you clear it manually )

2. Either generic or user name-able inputs ? as a recent poster wanted more for pressure testing within the system, pre/post IC, EGBP etc etc

3. I/O Expander
Maybe add a lambda controller to this ? So S6 models could be enabled for full dual lambda control without a separate wideband controller. ( or can it do this already, havent used one yet ? )

Add logging ability/memory onboard the expander ?

Would make for a cost effective logging memory upgrade to existing ecu's, even more important when adding more inputs and outputs. Or would the datastream not allow logging external to the ecu ?

4. Dedicated proper water injection feature for mappable flow and pump turn on/off ( existing seems more an IC water spray feature than water injection )

5. Android App for Bluetooth. All the cheapest tablets are Android which make for cheap display units. If an app does ever does appear, would the BT module pass enough data for external logging on the device ?

6. as per 2, some generic user name-able definable outputs ?

7. Trip/Limp feature for excessive Engine Coolant pressure ?

8. SView. Feature to allow saving of worksheet layouts for transfer to other computers.

stevieturbo
Posts: 838
Joined: Sun Dec 07, 2008 2:04 pm

Re: random features.

Post by stevieturbo » Mon Nov 17, 2014 2:57 pm

Launch cal option via its own switch on an S6

viewtopic.php?f=6&t=628

TimH
JT Innovations
Posts: 605
Joined: Wed Sep 01, 2010 2:51 pm

Re: random features.

Post by TimH » Mon Nov 17, 2014 6:29 pm

stevieturbo wrote: 3. I/O Expander
Maybe add a lambda controller to this ? So S6 models could be enabled for full dual lambda control without a separate wideband controller. ( or can it do this already, havent used one yet ? )
FYI I'm testing a prototype of a simple expansion unit right now. It has:

- 4 inputs (selectable as AV, AU, AB or AR types)
- 1x Bosch LSU 4,2/4.9 lambda amp
- 1x EGT amp
- Barometric pressure sensor
- H bridge output
- gyro
- accelerometer
- USB for configuration
- CANbus (of course!)

This will be launched at the Autosport show.

pavlo
Zen Performance
Posts: 406
Joined: Mon Aug 04, 2008 9:18 am

Re: random features.

Post by pavlo » Tue Nov 18, 2014 8:34 pm

You can do everything you want for WI using the nitrous strategy if you're not already using it.

stevieturbo
Posts: 838
Joined: Sun Dec 07, 2008 2:04 pm

Re: random features.

Post by stevieturbo » Wed Nov 19, 2014 11:46 am

pavlo wrote:You can do everything you want for WI using the nitrous strategy if you're not already using it.

Just using an external controller at the minute. I've already used up all the inputs/outputs on my S6 bar one ign output.
It's not a big deal for now

But good to know anyway

Slowie
Posts: 101
Joined: Thu Jan 17, 2013 7:30 am

Re: random features.

Post by Slowie » Fri Nov 28, 2014 7:16 pm

TimH wrote:
stevieturbo wrote: 3. I/O Expander
Maybe add a lambda controller to this ? So S6 models could be enabled for full dual lambda control without a separate wideband controller. ( or can it do this already, havent used one yet ? )
FYI I'm testing a prototype of a simple expansion unit right now. It has:

- 4 inputs (selectable as AV, AU, AB or AR types)
- 1x Bosch LSU 4,2/4.9 lambda amp
- 1x EGT amp
- Barometric pressure sensor
- H bridge output
- gyro
- accelerometer
- USB for configuration
- CANbus (of course!)

This will be launched at the Autosport show.
Please keep all us international customers unable to attend Autosport up to date on this. Sounds exciting!

TimH
JT Innovations
Posts: 605
Joined: Wed Sep 01, 2010 2:51 pm

Re: random features.

Post by TimH » Sat Nov 29, 2014 12:09 pm

Slowie wrote:
TimH wrote:
stevieturbo wrote: 3. I/O Expander
Maybe add a lambda controller to this ? So S6 models could be enabled for full dual lambda control without a separate wideband controller. ( or can it do this already, havent used one yet ? )
FYI I'm testing a prototype of a simple expansion unit right now. It has:

- 4 inputs (selectable as AV, AU, AB or AR types)
- 1x Bosch LSU 4,2/4.9 lambda amp
- 1x EGT amp
- Barometric pressure sensor
- H bridge output
- gyro
- accelerometer
- USB for configuration
- CANbus (of course!)

This will be launched at the Autosport show.
Please keep all us international customers unable to attend Autosport up to date on this. Sounds exciting!
Will do!

stevieturbo
Posts: 838
Joined: Sun Dec 07, 2008 2:04 pm

Re: random features.

Post by stevieturbo » Sun Dec 07, 2014 1:54 pm

Not that I use one ( yet..maybe )

But support for this ? Whether simply a correctly named logging feature.

http://www.fastmotorsports.com/products ... egates.htm

http://www.turbosmart.com.au/news/knowl ... sensor-cap

pavlo
Zen Performance
Posts: 406
Joined: Mon Aug 04, 2008 9:18 am

Re: random features.

Post by pavlo » Sun Dec 07, 2014 8:32 pm

ALready in the S8 not in S6 last time I looked but maybe soon...

stevieturbo
Posts: 838
Joined: Sun Dec 07, 2008 2:04 pm

Re: random features.

Post by stevieturbo » Mon Dec 08, 2014 12:35 am

Looking..I see the sensors seem fairly commonplace on modern diesels

http://www.ebay.co.uk/itm/261645621991? ... EBIDX%3AIT

Post Reply