CANBUS control of TC

Any feature requests for the Syvecs Engine Control Systems
Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Sun May 11, 2014 6:50 pm

TimH wrote:
Steve wrote:Tim, just to confirm you are saying use the CANBUS control for CALs and for TC use an input?
yes - simply because there is no control of TC CAL via CAN as yet (nor LC on/off) so it has to use an actual input pin, unfortunately.

That's me out of having Toucan currently then. I do not have any inputs available for CAL, TC or LC. Thats why I would need it all to be done via CANBUS or via the RS232 with the bluetooth module.
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Sun May 11, 2014 6:58 pm

Wez wrote:Just been speaking with Pat and he is working on the BT module firmware that will enable us to save the startup positions of all three outputs from the BT module, should have this ready in a couple of weeks, but this still requires the use of the BT module outputs and inputs on the ECU.

CAL and TRC switching via the BT module serial stream back to the ECU requires ECU firmware changes, I will have a chat with Ryan and see where we are with that as last I heard it was possible and was on the "todo" list :D

Thanks Wez 8-)
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

TimH
JT Innovations
Posts: 605
Joined: Wed Sep 01, 2010 2:51 pm

Re: CANBUS control of TC

Post by TimH » Sun May 11, 2014 7:37 pm

Steve wrote:
TimH wrote:
Steve wrote:Tim, just to confirm you are saying use the CANBUS control for CALs and for TC use an input?
yes - simply because there is no control of TC CAL via CAN as yet (nor LC on/off) so it has to use an actual input pin, unfortunately.

That's me out of having Toucan currently then. I do not have any inputs available for CAL, TC or LC. Thats why I would need it all to be done via CANBUS or via the RS232 with the bluetooth module.
Just to be clear: it's not a Toucan thing...it's a Syvecs/Life Racing thing. Once it's available via CANbus, it will be available on Toucan.

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Thu May 15, 2014 3:02 pm

Understood Tim.

Hopefully it will an added option soon.
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Sat Jul 05, 2014 11:33 am

Any news on TC being added for CANBUS or serial control?
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Thu Aug 14, 2014 12:25 pm

Steve wrote:Any news on TC being added for CANBUS or serial control?
:?:
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

pavlo
Zen Performance
Posts: 406
Joined: Mon Aug 04, 2008 9:18 am

Re: CANBUS control of TC

Post by pavlo » Mon Aug 18, 2014 1:08 pm

A variety of things is being worked on for Canbus input. With a much wider range of inputs than just the TC or Launch it's taking a little while, so sit tight for now!

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Mon Aug 18, 2014 1:24 pm

Thanks for the update :D
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

Steve
Posts: 41
Joined: Sun May 19, 2013 6:38 pm

Re: CANBUS control of TC

Post by Steve » Tue Dec 23, 2014 1:38 pm

Any further progress? :)
Toyota Supra BoostLab S366HF - 821 rhhp / 644 ftlbs
Syvecs S6 with aftermarket DBW setup on Greddy Style Intake manifold.

pavlo
Zen Performance
Posts: 406
Joined: Mon Aug 04, 2008 9:18 am

Re: CANBUS control of TC

Post by pavlo » Tue Dec 23, 2014 7:49 pm

Yes, just not so much progress that is can be publicly released. It's a significant change as it's not just one value that's being added to CANBUS input but a whole new framework.

Cheers

Paul

Post Reply