Syvecs Forums

thanks for reply can you clarify exactly where resistor has to go .

hi i need advice on setting up tach output .out put is assigned to pin 4(ignition 6) what other settings have to be configured to get an output ,thanks in advance steve

hi i need some advice on setting up crank pulley.we r running 36-1 so in s cal have set 35 teeth 35 gaps but have got question marks next to settings for gap widths etc ,i thought the settings already in the generic single gap single cam were already set? any help much appreciated

hi iam going to be using low impedance injecters on an s8 and need to know how to work out what size ballast resistors to use.thanks in advance

thanks for help ,steve

hi pavlo just to clarify coil wiring, do you mean +12 and signal together and ground to ecu or +12 and ground to coil and signal to ecu .and where does resistor need to go

forgot to say second bank r mike moran injectors

forgot to say 2nd bank r mike moran injectors

1200rc injectors on first bank and2600 mike morans on second bank these might seem big but we are running methanol

thanks again , have already got eight injecters so looks like we will be using a ballast pack(will be back on here asking about ballast packs at a later date ) cheers