Search found 42 matches

by Chartreux
Fri Mar 01, 2019 7:57 am
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

Re: MY00 GC8 with AVCS don't start

So I tried with syncscope but it seems I made something wrong, I don't have any log file. I decreased the limit to 0 rpm with no chance - I have the red message : No log found. It could be explained by the fact that I have no rpm signal on the gauge in Scal Below this is a screenshot of gauges befor...
by Chartreux
Wed Feb 27, 2019 12:08 pm
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

Re: MY00 GC8 with AVCS don't start

So, I spend some time on the crank issue and finally I think I found the problem, by chance. It's located just at the end of the connector of the crankshaft sensor. When I pulled on one wire of the connector of the crank sensor, I felt a strange feeling on the orange wire. Finally I found that the c...
by Chartreux
Mon Feb 25, 2019 6:38 am
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

Re: MY00 GC8 with AVCS don't start

So, ECU is welle connected, I have the green light, no problem No Erros appear when I go "Device / Errors" it's clear I add som gauges for crank / cam / rpm It seems I have no crank signal, it stay around 5V, no signal visible I have cam signal, I can see the trace. RPM Don't vary so much,...
by Chartreux
Sat Feb 23, 2019 2:05 am
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

Re: MY00 GC8 with AVCS don't start

Oh yes, fuel tank is not empty :lol:
by Chartreux
Sat Feb 23, 2019 1:56 am
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

Re: MY00 GC8 with AVCS don't start

This is my first attempt to start the engine which is brand new. It never fired up before. Fuel pump is priming Starter is running, Engine is turning But nothing happen. Injectors are ID1000 brand new. I've used the calibration given by ID in the map Spark plugs are NGK PFR7G brand new too. Ignition...
by Chartreux
Fri Feb 22, 2019 3:35 pm
Forum: Subaru
Topic: MY00 GC8 with AVCS don't start
Replies: 22
Views: 35349

MY00 GC8 with AVCS don't start

Hi everybody, All is now in the car but it don't start for the moment... Starter is running, but enginde don't fire up :cry: I have no errors with the syvecs, Pin assignment seems correct but I can't understand what's happen. Probably a dumb problem again, but I would appreciate some help ;) https:/...
by Chartreux
Sun Oct 28, 2018 10:14 am
Forum: S6 GP/PnP Technical
Topic: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)
Replies: 9
Views: 13438

Re: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)

Thanks to point me in the right direction. I think I found the problem. I had shorcut between 2 pins of the MAF connector I hacked to plug the IAT Now, with all sensors plugged, I have no more errors and a nice and constant trace (sorry for bad picture) http://i1293.photobucket.com/albums/b589/thier...
by Chartreux
Fri Oct 26, 2018 8:54 am
Forum: S6 GP/PnP Technical
Topic: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)
Replies: 9
Views: 13438

Re: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)

I'm back because, what seems to be fixed is no more fixed. I don't understand because everything was untouched and now errors are back again for the MAP sensor So, MAP sensor is plugged to AN10 which is supposed to be 5V. Pin assignment is correct http://i1293.photobucket.com/albums/b589/thierry_lou...
by Chartreux
Sat Oct 13, 2018 7:13 pm
Forum: S6 GP/PnP Technical
Topic: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)
Replies: 9
Views: 13438

Re: Errors issue S6 PnP (Subaru GC8 MY00 EUDM)

Thanks for your time to help me. So, I made the test and after long analyses, I finally found the faulty cooling temp. Evrything goes well when changed the cooling temp by another one. For the MAP sensor, I finally found a damage wire. Now it's fixed ! Thanks again for time and explanation, it was v...