Syvecs Forums

I cant add positive numbers in here so I basically remove from boost target limit. The clue is in the name..... boost target limit :D In other words, the most boost you ever want to achieve, period. This is why the adder can only take negative numbers, you don't ever want to make more than the limi...

just checked my calibration file again. it seems that i set the ON throttle position below %5 and OFF throttle position to %80. I thought ON throttle position value is where the ecu turns the output ON above this value. so I set it below my default TPS value (%5) but it seems like it works like hyst...

weird
This is what i did :/
I get idle raise by pressing the A/C button(Aircon sw gets ON) but the AirCtrl remains OFF.
May be i need to check aircon relay.

I got sort out cal error problem by selecting NONE from datastream temporarily but I couldn't make A/C work yet. The original output configuration was Inputs: Brake by wire PWM_01 Output: Loadcell AN12 I change it to Inputs: Aircon Switch AN12 Output: Air Con control PWM_01 the problem is "Airc...

I am getting a cal error active LR CAN datastreams frames must be filled
It is a MY98

cheers

Wow great! I was not expecting to see A/C upgrades that quick! May be it is because of the summer time
That will help a lot!
Thanks

We change things.... much more frequently than some other manufacturers, in response to customer demand. I need to post up 1.17.1 firmware, so in the last couple of weeks we've gone through four firmware revisions! Keeping documentation up to date with the firmware in a printed for would be a sizea...

Possible.

Check out the working sheet i posted and you will see the S6 MY97-98 Wiring page in that file. This page is the same as comment section for MY97-98

I'm running aftermarket cams and lightweight flywheel and the idling was a bit problematic for me with Apexi PFC. The idle strategy of the Syvecs ECU is very well when compared to my old Apexi PowerFc. Especially the vehicle speed related idle control works like charm! I am still having problem when...

viewtopic.php?f=2&t=105&p=444#p444

I asked the same question before )